Step 1
Choose the correct size to fit the fastener, use the one with a slightly
larger diameter hole than the fastener.
Step 2
Clean the area around the hole that the bottom of the bolt head tightens
against, use a solvent for greasy or oily surfaces.
Step 3
Peel off the chosen size Hare Around It™
Step 4
Stick the Hare Around It™ on the surface around the hole.
Step 5
Insert the fastener and tighten to manufacturer's torque specifications
+ 5%. When the fastener is tight, you should see the shape of Hare Around
It™ change under the head of the fastener. This means it conformed to any uneven surface discrepancies around the hole and beneath the fastener head.
Get Hare Around It™ Today!
*Buy any quantity up to 5 for the same shipping cost
Need More Than 18? Contact Us Below for Special Pricing